Hole Punch Die with Silver Base for Green Machine Hand Press

Specification

• Brand: Trimming Shop
• Product Type: Hole Cutting Die
• Machine type: Green hand press machine
• Size
  
  • Dies:
    • Upper Thread Size: 8mm
    • Bottom Base Size: 19mm
  • Material:
    
    • Dies: Iron
• Use:
  • Dies used for hole cutting for cardboard, vinyls, plastics and some leathers. For finer fabrics we would suggest Gold or Plastic Base Die sets
  • Use hand press machine press on firm or flat surface or else you fix it on your workshop or desk using the opening on the base

Description

Our die set tools are designed for commercial as well as non-commercial use, also suitable for the hobby enthusiast.

You can use them to stud fabric, leather, vinyl, paper, fabrics, cardboard, canvas, tarpaulin etc. with ease.

Available in 2mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 17mm, 18mm, 20mm size as per usage.

This die set tool kit is convenient for mostly all types of Green Hand Press Machine. Thread screw is 8mm and the size of the bottom base part is 19mm.

How to Use Green Machine

• Step - 1: Unscrew the nut at the top of the machine.
• Step - 2: Insert the handle with the larger side at the top of the machine
• Step - 3: Insert the bolt through the machine and handle. Then tighten the bolt with the nut.
• Step - 4: Insert the larger of the die pieces into the hole at the bottom of the machine. Hold the die in place by tightening the side screw.
• Step - 5: Screw the similar of the die pieces directly above the larger die.
  • Tip: Please do not over tighten

Please Note: While setting up dies to the hand press machine or removing them. Please do not continue to force the dies as they will eventually get stuck.